The 2N® SIP Audio Converter is an IP paging device with many useful functions. It can be used at the workplace, in schools, offices and other public spaces. You can use it with a loudspeaker as a simple PA system or with a microphone as a two-way intercom. The link between IP technology and an SIP protocol enables announcements to be sent to all the devices in the system, to select individual zones or call a specific device. With an external microphone and button, an end station can call up to three pre-selected numbers. It is then possible to control one external switch from these workplaces with any function based on the needs of the given operation.
The 2N® SIP Audio Converter uses no moving parts, so you can expect easy installation, reliable operation and long life without the need for maintenance. Each device can be configured via its own web interface or using the application 2N® Helios IP Manager. This makes it easier to configure a large number of devices from one place. If installed at height or in other inaccessible locations, the volume can be regulated via remote control or a web interface.
The 2N® SIP Audio Converter is a universal device for simple and effective communication, increased security and property protection. It can act as a PA system or simple intercom. See what it can do for yourself, and it will inspire you to improve the effectiveness of operation at your workplace and save on company costs.
Effective public address system
Powerful built-in amplifier
Input for external microphone
Utilisation of existing LAN/WAN network
Web interface for configuration
Large Multinational Corporation
Dimensions and weight - standalone unit 2N® SIP Speaker
Dimensions 105 x 34 x 86 mm
Dimensions (with L-profiles) 130 x 34 x 86 mm
Weight 300 g
Output of power amplifier : 4 terminals on rear panel, STEREO/MONO with auto detection
Speaker impedance : 4-8Ω
Amplifier performance : Up to 2x10W depending on connection
Frequency range : 20Hz – 20kHz (+/- 0.5dB)
Harmonic distortion : 0.05% @ 1kHz
Signal to noise ratio : 91dB
External power supply: 12V DC / 1.8A
LAN power supply : PoE IEEE 802.3af
Status signal : 3x RG LED on front panel
Local control: 3x Button on front panel
Remote control: 1x Infrared detector on front panel
LAN connection : RJ-45 connector on rear panel 10/100BASE-TX with Auto-MDIX function
Earphone/line out: 1x STEREO 3.5mm jack on front panel
Microphone/line out : 1x STEREO 3.5mm jack on front panel
Subscribe to Our Newsletter to get latest news on solutions & technologies from our vendors.